RR Part Numbers

Railroad Product Lines

  • RR Telecom
    Chargers, ETD, HTD, Radio, RF Assy, Antenna, Mic, Headset, Speaker, Power Cable,Test Fixture, Parts
  • RR PTC
    Positive Train Control (PTC) Parts & Assemblies
Distributed By

General Specifications
Frequency Range 450-470 MHz
Number of Channels 8
TX/RX Spacing 20 MHz Max (within freq range)
Mode of Operation Simplex or Half Duplex
Channel Increment 5-6.25KHz (synthesizer step soze)
Emissions Bandwidth 11 KHz narrow mode; 16KHz wide mode
Frequency Stability 1.5 ppm (-30°C / +65°C)
Supply Voltage 7.5-10 Vdc (10 Watt version)
Operating Temp -30°C / +65°C
NOTE: Data sheet above has a comprehensive listing of all this radios's specs.

RRD-1015 Fits US&S: Unmodified 6695, 6696, 6699

Drop in plug-and-play replacements for US&S UNMODIFIED models 6695,6696 and 6699 (click here for RRD-1015M, modified version)
• One programming kit can be used for all RRD radios; very cost effective and it also;    simplifies the maintenance and upgrade process.

• Dedicated In-Service-Adjustment (ISA) port minimizes the risk of programming wipes    and radio damage. Competitors utilize a programming pin in the HTD harness    exposing the radio to the risk of dangerous voltage levels during programming.

• Software programmable for 12.5kHz narrow or 25kHz wide band.

• Both low & high power are programmable; factory delivered at 2 and 8 Watts    respectively.

• 450-470 MHz frequency range.

• Frequency stability standard @ 1.5 ppm for fixed applications.

• Ultra fast TX/RX attack times.

• Controlled Envelope(sm) TX keying.

• Meets FCC and IC Canada standards.

• All electronic settings are software programmable.

• No on-board or hardware adjustments are required.

• Field replaceable harnesses and cables are available for easy repair.

• SMD component design.

• Integral heat sink for extended duty.

• Designed and manufactured in the USA.